5kV 6mm2 XLPE CTS PVC Cable, Airport Lighting Cable
PRIMARY AIRPORT LIGHTING CABLE COPPER CONDUCTOR, XLPE INSULATION, COPPER TAPE SHIELD, HDPE SHEATH
GENERAL SCOPE
- Airport lighting cable 5 kV used for power transmission from power generator to lighting and guiding light … in lighting system of airport. Buried direct in ground or install in duct buried in ground, rated voltage 5 kV.
APPLIED STANDARDS
- FAA L-824 Type C
- ANSI/NEMA WC 74/ICEA S-93-639-2012
CONSTRUCTION
| Conductor |
Stranded bare or tinned copper. |
| Inner Semi-Conductor |
Extruded semi-conducting compound. |
| Insulation |
XLPE. |
| Outer Semi-Conductor |
Semi conducting tape or extruded. |
| Shield |
Copper or brass tape(s). Tinned copper wire braid can be offered upon request. |
| Sheath |
PVC. PE/XLPE can be offered upon request. |
TECHNICAL CHARACTERISTICS
Rated voltage: 5 kV
Test voltage: 18 kV AC (5 minutes)
Maximum conductor temperature for normal operation is 90ºC
Maximum conductor temperature for short-circuit (5s maximum duration) is 250ºC
Continuous working current upto 20 A
Minimum bending radius: 9 x D (D: cable diameter)
Dimensions and Weight
| Construction |
No. of Strand |
Nominal Insulation Thickness |
Nominal Overall Diameter |
Nominal Weight |
| No. x mm^2/ AWG |
- |
mm |
mm |
kg/km |
| 1×6mm^2 |
7/19 |
2.3 |
11.0 |
180 |
| 1×8 |
7/19 |
2.3 |
14.3 |
298 |
| 1×6 |
7/19 |
2.3 |
15.4 |
366 |
| 1×4 |
7/19 |
2.3 |
17.0 |
513 |
Audited Supplier 
){kind=link}
){kind=link}