| Application: | Overhead |
|---|---|
| Voltage: | Low and Medium Voltage Cable |
| Current: | DC Cable |
| Insulation Material: | XLPE |
| Sheath Material: | Crosslinking |
| Material Shape: | Round Wire |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Self-supporting protected insulated single-core high-voltage wire For overhead power distribution lines rated voltage 12/20 kV. Not suitable for direct burial.
SIP-3, SIP-3…g, SIPn-3, SIPn-3…g (SAX-3, SAX-3…, SIPn-3, SIPn-3…)
20 kV; 30 kV
These wires are used for laying aerial electric power lines for the rated voltage from 10 kV till 35 kV at a rated frequency of 50 Hz.
These wires are intended for overhead electric power lines in moderate, cold and tropical climate.
Climate class (NF), location categories 1, 2 and 3.
Wire SIP-3…g: self-supporting protected insulated single-core high-voltage wire with sealed conductor, light-stabilized XLPE insulation.
Wire SIPn-3: self-supporting protected insulated single-core high-voltage wire with light-stabilized XLPE insulation. This wire have flame-retarding ability when laid in bundles.
Wire SIPn-3…g: self-supporting protected insulated single-core high-voltage wire with sealed conductor, light-stabilized and flame-retardant XLPE insulation. These wires have flame-retarding ability when laid in bundles.
Ordering designation of cable: SIP-3 1×95-35.
Conformity the foreign-made analogues:
SAX, PAS (SFS 5790, SFS5791; Finland),
AALXS, AALXSn, AFLwsXS, AFLwsXSn, AAsXS, AAsXSn, AAsXSnu (Poland).
Conductor
Multicore aluminum-alloy stranded compacted round conductor.
Wires with sealed conductor are designated as SIP-3 1x95g.
Wires with sealed conductor are contain a water-blocking material or materials.
Insulation
Laid-on by extrusion from cross-linked polyethylene (XLPE).
3. Technical characteristics
Performing only single-core wires
| Rated voltage | 20 kV and 35 kV |
| Nominal conductor cross-section | 25 - 240 mm² |
| Ambient temperature during operation | from -60 °C up to +50 °C |
| Wires are resistant to the effects of solar irradiation | |
| Sealed conductors of wires are resistant to longitudinal propagation of water | |
| Minimal temperature of wire laying without pre-heating | -20 °C |
Maximum permissible temperature for the conductors heating:
|
|
| Minimum allowed radius of bending during wire laying, no less: | 10 outer diameters of wire |
| Guarantee period | 3 years |
| Service life | 40 years |
| Wire | Number and nominal cross-section of conductors, mm² | Nominal overall diameter, mm | Weight of 1km of wire, kg |
|---|---|---|---|
| Self-supporting protected insulated single-core high-voltage wire SIP-3 20 kV | 1×35 | 12.00 | 186 |
| 1×50 | 13.00 | 215 | |
| 1×70 | 15.00 | 282 | |
| 1×95 | 16.00 | 364 | |
| 1×120 | 18.00 | 445 | |
| 1×150 | 19.00 | 540 | |
| 1×185 | 21.00 | 722 | |
| 1×240 | 24.00 | 950 | |
| Self-supporting protected insulated single-core high-voltage wire SIP-3 35 kV | 1×35 | 14.00 | 209 |
| 1×50 | 16.00 | 263 | |
| 1×70 | 17.00 | 334 | |
| 1×95 | 19.00 | 421 | |
| 1×120 | 20.00 | 518 | |
| 1×150 | 22.00 | 618 | |
| 1×185 | 24.00 | 808 | |
| 1×240 | 26.00 | 1045 |
Breaking strength of conductors of self-supporting protected wire is described next table:
| Nominal conductor cross-section, mm² | Breaking strength of conductor, kN, not less |
|---|---|
| 25 | 7.4 |
| 35 | 10.3 |
| 50 | 14.2 |
| 70 | 20.6 |
| 95 | 27.9 |
| 120 | 35.2 |
| 150 | 43.4 |
| 185 | 53.5 |
| 240 | 69.5 |
Permissible current loads calculated for the ambient temperature +25°C, wind speed 6 m/s and solar radiation intensity 1000 Vt/m², and permissible short-circuit currents for these wires are described in cross-section «Reference data».
Wires are bending - resistant during installation. Suspension of wires in overhead power lines must meet the requirements of Electrical Installation Regulations.
Manufactured wire lengths may be agreed with the customer request. Transportation and storage of wire must accordance with GOST 18690.
The manufacturer can ensure compliance of wire quality with requirements of DSTU 4743 and current technical specification, provided all terms of transportation, storage, installation and use have been observed.
On customers request other marking of wire is allowed.
Wires are delivered on drums.
All products are certified.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}