| Customization: | Available |
|---|---|
| Application: | Overhead |
| Voltage: | Low and Medium Voltage Cable |
|
Still deciding? Get samples of US$ 0/Meter
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Conductor 100mm2 7*4.39mm AAC Wasp Applications
Bare conductor Cable all aluminum conductor (AAC) is made up of one or more strands of hard drawn 1350 aluminum alloy. These conductors are used in low, medium and high voltage overhead lines. AAC has seen extensive use in urban areas where spans are usually short but high conductivity us required.
Conductor 100mm2 7*4.39mm AAC Wasp Construction
AAC Conductor Wasp 100mm2 can be used in low and medium voltage overhead lines.It is a concentric-lay-stranded conductor consisting of aluminum 1350 wires.
AAC Conductor Wasp 100mm2 strands 7 aluminums. The individual wire diameter are all same 4.39mm. The overall diameter for AAC Conductor Wasp 100mm2 is 13.17mm. The conductor cross section is 100mm2 . After the cabling, the total linear mass is 290 kg/km. Through the test, the calculated breaking load should be 16kN. At the 20ºC, calculate D.C. resistance should be 0.2702Ω/km.
| Code: | Wasp |
| Stranding: | 7 |
| Cross Section Area: | 100 |
| Diameter Individual Wire Aluminum (mm): | 4.39 |
| Diameter Complete Conductor(O.D.) (mm): | 13.17 |
| Weight Per 1000meters Total (kgs): | 290 |
| Minimum Breaking Load (KN): | 16 |
| Resistance DC 20°C Per 1000Meters: | 0.2702 |
Packing & Shipping
Any problem and inquiry pls contact with Tina
){kind=link}